How to Extend Your Water Heater’s Life Expectancy
January 19, 2020Water heaters are significant to every household that owns them. Some days are just too cold for us to use water straight from our pumps. Luckily, water heaters can provide us water that is heated right away.
Believe it or not, the average life expectancy of a water heater ranges from 8 to 12 years. While the years are quite long enough for you to enjoy your water heater, there are some things that you can do to reach its maximum life. You can even double the life of your water heater with proper maintenance. By taking care of your water heater, you don’t have to deal with replacing them more often than what you have anticipated.
Flush Tank Regularly
One factor that makes your water heater get damage is the accumulation of sediment and minerals on the bottom of the tank. This accumulation that comes from the water can result in overheating and sustaining damages to the lining of the tank. To avoid this from happening, you must drain a couple of gallons from your water heater’s drain once or twice a year. A full flush is required if you still see dirt and debris in your tank even after numerous draining of water.
Apply Pre-Filters and Softeners
If you want to filter the water before they enter your water heater, then look for a scale inhibitor. A scale inhibitor serves as your first line of defence against the sediments of the water. This tool can treat your incoming water through the filter before it can enter your water heater tank. Aside from sediments, other irrelevant debris is also filtered out by the scale inhibitor.
Install an Anode Rod
Prolonged water exposure of the water heater can eventually cause corrosion. One good way to avoid this is by installing an anode rod.
Anode rod is made up of aluminium, zinc, or magnesium, and is designed to hang inside the water heater. Corrosion will first consume the anode rod before focusing on the metallic parts of the water heater. Before the anode rod is completely consumed, you can replace it with a new one to avoid damaging your water heater itself. The replacement can be done at least once a year. You can also opt to install two anode rods for enhanced protection.
Add Expansion Tank
Water expands with heat. So, whenever your water is heated, it doesn’t have any place to go. Instead, it will just add pressure within your water heater’s tank that can be dangerous. To avoid bursting your water heater open from extreme pressure, you may want to add a water heater expansion tank. This tank can give the water a place to go whenever pressure is building up in the tank. With lesser pressure, your water heater can work at its full potential again.
All these mentioned ways on how to extend the life of your water heater will certainly be helpful for you to save time, energy, and money. If you want to know more about your water heater, you can contact us now at Abundant Hot Water.
Optimized by NetwizardSEO.com.au